8.5LB Athena Bidirectional Flow Closed Loop Extractor
***Note: Butane(Solvent) not included with systems unless ordered with dropdown menu or separately. Any order with butane WILL NOT SHIP EXPEDITED.
DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well ventilated areas. Check with your local fire marshal for guidance when operating indoors MK-VI Bi-Directional Flow Closed Loop Reclamation Extraction System (Comes with 1 yr. Limited warranty) Please Read Optional Upgrades Section for Clarification on System Upgrades DISCLAIMER: BY UPGRADING TO SWAGELOK VALVES YOU ACKNOWLEDGE THAT YOUR ORDER MAY TAKE 3-5 BUSINESS DAYS TO BE FULFILLED AND EXPEDITED SHIPPING MAY NOT BE REFUNDED. The 8.5lb Bi-Directional rack has the same function as the stand alone biflow, but with the convenience of a rack mounting system. By using a bottom flood on the first wash to ensure all material has seen solvent, preventing channeling through the material. Finish the run with a top flood input to ensure all residuals have been washed from the material. Oil bearing solvent is collected in the collection base under the material column. Once collected, solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent. This unit can be upgraded into an Active recovery unit by purchasing the upgrade kit.
Extractor Configurations:
Explorer | Professional | Elite |
|
|
|
Unit Includes: Collection Base •12"x24" Base •Assembled 12" biflow lid 80-20 rack 6"x48" bracketed material column with reducer & top cap (2)6" filter plate kit 2" Solvent input manifold #100 LP tank 1/4" 48" High Pressure PTFE Braided SS Hose 1/4" 60" High Pressure PTFE Braided SS Hose (2)3/8" 48" High Pressure PTFE Braided SS Hose (2)12" clamps, (4)6" clamps, (3)2" clamps, and (2)1.5" clamps with gaskets 2" filter gasket Extra of each type of gasket Instruction Manual
Specifications: • 6"x 36" 304 Stainless Steel Material Tube 8.5lb (3900g) •316 Stainless Steel Fully Encapsulated Miniature Ball Valves • System Rated to 150PSI • Multiple port connections for _" 316 Stainless JIC 37 Degree • 304 Stainless Steel Base Container 12" diameter by 24" tall • Tri-Clamps at all interfaces make for a high pressure, easy clean unit. • Viton Gaskets are designed for Oil Processing Temp range -40-200F • Dimensions (Inches): • Weight: • Operating Temperature Range: -40F to 160F • Ultimate Vacuum: as low as 10 Microns • Base unit Maximum Capacity: 2819 Cubic inches, (46.2 Liters) • Construction: All components made of 304 Stainless Steel. • Max Vacuum -29.9inHg • High Polish Interior
*Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.