Toms Tumbler Python 1200 Dry Trimmer

Toms Tumbler Python 1200 Dry Trimmer
Product Code: Toms Tumbler Python 1200 Dry Trimmer
Availability: In Stock
$120,000.00 $75,000.00

Available Options or Discounts

Save $1000 Now!:

* Return Notice:

Qty: Add to Cart
Visa,Mastercard,American Express,Discover,Paypal,Wire Transfer

toms tumbler logo

Toms Tumbler Python 1200 Industrial Hemp & Cannabis Trimmer


Fast, accurate and reliable trimming.

Toms Tumbler Python 1200

The PYTHON 1200 is a continuous feed cannabis or hemp trimmer that processes 50-60 lbs in 3-5 minutes and continuously fed it processes up to 1200 lb. per hour.  

The Python is gentle yet efficient, using Tom's bladeless, tumbling technology that preserves your bud's trichomes and crystals better than all the other trimmers.  Our batch tumblers have been so popular, customers wanted a continuous feed version and we have 3!

The Python 1200 is the largest Python for large volume hemp growers and processors.

The Python 1200 is all stainless steel, with food-grade plastic augers, high volume conveyor for feeding the Python continuously, manual speed control, baffles to adjust the flow of bud through the chamber, wash-down motors with speed controls, interchangeable stainless steel and food grade plastic mesh nets for fine tuning your trimming.  

  • An optional high grade vacuum Kief Collector is available for an additional $2,200.
  • The Python is easy to clean and maintain.  The Python is safe and easy to use.
  • The Python comes with a 3-year warranty and 7-day phone support on the proper use and care of the Python.  

NOTE: The Pythons do not currently come with the CO2 infusion.  A cost-effective means of flash freezing buds in the Python is currently under development.





The PYTHON frame and feed hopper are  made of 100% Stainless Steel. All other parts are food grade. All motors and gearboxes are wash-down. Each unit comes with various size food grade plastic and stainless steel meshes for versatility.  Meshes are durable, and commercial grade.


Model 400

Main Trimmer Unit ......................................8ft long x 4ft wide x 6 ft tall 

Detachable Hopper with Auger and Connector ....... 16ft. x 4ft. x 6 ft.

Model 600

Main Trimmer Unit .................................................10 ft. x 4ft. x 6' tall

Detachable Hopper with Auger and Connector ....... 16ft. x 4ft. x 6 ft.


Model 1200

Main Trimmer Unit …...…......…………… 12' long x 4' tall x 6' wide 

Detachable hopper with Auger and Connector ….....16ft long x 5ft tall x 4ft wide


We recommend allowing 5 feet on the loading end of the trimmer / hopper on all sides to allow room for loading untrimmed flowers and filling totes or bags with trim and trimmed buds.  The PYTHON should be fed continuously so it is important to have hundreds of pounds of material ready to load.

Allow 4-5 feet at the end of the PYTHON for catch bags to catch trim and buds, and have bags / bins ready to replace.  Remember the PYTHON processes very quickly.


Various Horse Power wash-down motors drive the two augers, tumbler trommel and conveyor belt.  Electricity 110 AC, two 15 amp receptacles required.  Two outlets are needed to power the PYTHON.  Connect two motors only one per outlet recommended.



  • High Volume Trimming:  Between 400 and 1200 pounds per hour, depending on Python
  • High Volume Screw Auger Feed Hopper or optional gravity feed.
  • Auger draws flowers into first section of trommel.
  • Trommel rotation speed can be adjusted with motor speed control, but 30-35 rpm is recommended.
  • Food Grade Conveyor Belt catches trim underneath trommel and carries it to the end where catch bags or bins collect.
  • Trimmed flower exits the trommel out the end side shoot and into a catch container or catch bag.
  • Removable see through panels allow also act as a safety barrier when machine is in operation.
  • Extremely Quiet
  • User Friendly Turnkey Setup and Operation.



Heavy tires and castor wheels for easy transport

Optional Add on Features

  • High Capacity Clean Dust/Kief Collector
  • Kief Extraction Nets


  • Hose or power wash trimmer (all motors are wash down and speed controls and protected)
  • Interchangeable Meshes are Removable and Washable


Full 3 Year Warranty on the PYTHON with Fast Response for Replacement Parts or Service.

PREPARING THE BUDS/FLOWERS.  Make sure flowers/buds to be trimmed are bucked down (free of large water leaves, branches) and sugar leaves are dry and brittle (sugar leaves should not be not flexible at all).  Dryness inside the buds should be about 10 percent
moisture ideally but again sugar leaves need to be brittle for the Python to allow bud/flowers to trim each other as they tumble and move through each section of the cylinder (trommel).  Make sure you trim in an environment where humidity is low and will not rehydrate the sugar leaves on the flowers buds.  Rehydrating sugar leaves will make them flexible again and then they will not trim properly or at all, and may jam the feed auger tube.

FEEDING THE PYTHON.  All motors should be on and running their corresponding components. (conveyor, augers, and cylinder) You are now ready to feed the PYTHON.  To test a quality run, and to make fine adjustments, make sure you feed a few hundred pounds into the feed hopper and through the Python. This can be accomplished by continuallyfeeding the hopper as to to keep in relatively full. The first section of the cylinder should be at least half full always to ensure proper trimming.


A  All components (screw augers, conveyors, and cylinder/trommel) have adjustable speeds controls for fine tuning. The trommel should always be rotating between 30 and 35 rpms.  The screw auger feed should be adjusted so product flow in first section is always around half full. The conveyor and top screw auger (anti-bridge auger) in hopper should be on full speed.

B  Various size and type of material for meshes allows for more and less aggressive trimming, as well as different size flowers to be trimmed. We recommend the Stainless steel ½  inch mesh on first section and food grade plastic ½ inch mesh on second and third sections of trommel/cylinder for best trimming.

The PYTHON should be fed dried flower into the feed hopper on a continuous basis. The speed at which the flowers flow into the PYTHON is adjustable, but a continuous flow of flower is needed for the Python to work best. One should adjust speed control on feed auger so the first section is always at least half full.  The concept being, the buds trim each other better when there is more weight in each section. The weight and tumbling of the buds rubbing against each other is the mechanism through which the tumbler works.

The PYTHON processing speed has various adjustments. The controls for these are in the metal motor box on the side of the PYTHON.  All motors have adjustable speed controls, thus allowing for fine adjustment of the flow of flowers into machine as well as how fast flowers trim each other. Press green to turn the motor on and red to stop it.  Turn the black button to adjust the speed.

The PYTHON also has an adjustment to change the angle of the trommel allowing gravity to slow down or speed up the trimming process. Gravity is used to move the buds through the chambers from the beginning to the end of the PYTHON as the PYTHON is angled optimally to support this movement.

There are no reviews for %s

Write a review for Toms Tumbler Python 1200 Dry Trimmer

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: