Sluice Box MJ Pre Roll Machine
The Sluice Box MJ is able to Fill and Pack ( Packer sold seperately) over 400 Joints!
Please choose size of cartridge for cone plate from drop down box above
Sluice box break down
Sluice Box: use with Pre-Rolled Cones and Pre-Rolled Cigarette papers Optional Plates.
Capacity: Can fill up to 401 pre-rolled cones or pre-rolled cigarette style papers per run
Packer Optional: Additional packer attachment available to create perfectly packed cones.
Power:110 volt
Machine Size: 25 in x 15 in x 18 in
Lead Time is typicall 3 to 7 days.
Parts- base, tray with cone cartridge choice of 1/2, gram (84mm/1 1/4 ) or full gram {98mm/109mm) and the new 1 gram or 1/2 gram cigarette cartridge,
top, packer, dividers. Holes in cone cartridge are or oversized 5000 th to accommodate different brands.
Bottom of cone cartridge is tapped to apply shim if need for height.
Material all food grade or better.
Basic directions
1. Place base on level surface
2. Place tray on base
3. Set cone cartridge over tray, make sure tray lifts freely from base upwards to bottom of cone
cartridge
4. Load pre-roll cones into cartridge holes
5. Place top over cartridge
6. Apply material evenly across top
7. Press power button on, move material to corners if needed or until material is gone from top
8. Remove top
9. Move any excess material into cones
10. Optional place packer on cartridge and then remove
11. Lift up on tray, pre-rolls will rise up from cone cartridge move off of base and set to side making
sure tray is supported in up position
12. Note depending on material, variations can apply to step 5 through 10 for pack and fill and
amount oftime or quick presses of on button. Also applying small amount of pressure with hand
to cone cartridge will decrease amount to vibration if desired .
13. Step 10 packer can be raised or lowered by six screws on top for desired depth of pack
14. If using dividers place in desired location on cone cartridge then put top on and line up dividers
with dividers in cone cartridge. This allows sluice box to run more than one strain at a time or
smaller amounts if desired.
Machine will process 325 1 gram cones or 406 Half Gram cones.
Sluice box package comes with base, one cone cartridge with tray choice of 1/2, or full gram or Cigarette, one top, set
of dividers. Additional cone cartridges $1,900.00 each. Optional packer $900.00.
Each cone cartridge will do over thousand pre roll per hour and with the ability to apply a new cone
cartridge every five to ten minutes gives opportunity to do thousands of pre-rolls per hour.
***Motor comes with a 1 year full manufacture warranty starts from date of purchase***